PADMOUNT SPECIFICATION SHEET      
       
Email   Customer Name     ZIP Code:  
Company Name:     KVA:   QTY:   SO#:   PART#:  
PHASE:   FLUID:   TEMP:   COOLING:     HERTZ:   CONDUCTOR:     AMBIENT:  
THREE   Type II OIL     65 C   ONAN   60 HZ   ALUMINUM       30 C avg.  
SINGLE   R-TEMP   55 C   ONAN / ONAF-FFA 50 HZ   COPPER       40 C avg.  
    SILICONE   55/65 C   ONAN / ONAF-less fans  
    BIOTEMP   OTHER   ONAN / ONAF  
            ENVIROTEMP(FR3)                                                                           5 LEGGED CORE  
HIGH VOLTAGE   TAPS:   LOW VOLTAGE      
HV:     2-2 1/2% FCAN & BN   LV:    
  BIL: kV   4-2 1/2% FCBN   BIL: kV  
CONNECTION:   2-2 1/2% FCAN & 4-2 1/2% FCBN   CONNECTION:  
DELTA   OTHER   DELTA    
WYE     With single Phase Mid-Tap Coil  
  HO Bushing w/full BIL HO Ground Strap     WYE  
  Neutral internal & isolated   IMPEDENCE:   XO bushing  
  Neutral internally grounded   STANDARD   XO bushing w/ground strap  
GROUNDED WYE (HO-XO Comm.)   OTHER   %   GROUNDED WYE (XO-HO Comm.)  
                                              NOM MIN     MAX                                                    
HV CONFIGURATION:   HV BUSHINGS     LV BUSHINGS:  
Radial Feed   Live Front. . . .   or . . .   Dead Front   4-hole spade  
Loop feed   5/8" eyebolt   Wells   6-hole spade  
Dual Radial feed   2-hole G spade   INSERTS FACTORY INSTALLED   8-hole spade  
  (Alternate Source)   OTHER   Inserts QTY   10-hole spade  
6 Bushings (RADIAL FEED)     Feed thru QTY       12-hole spade  
  3 for incoming feeders       One Pc. 200A LB   OTHER  
  3 for arresters   One Pc. 600A Deadbreak    
                                                        Other                                                          
ACCESSORIES:  
Standard (L. L. Gauge, Thermometer, P.V. Gauge, 1" fill plug & filter press connect., 1" DV&S, pressure relief valve, NON-PCB on Nameplate,  
  gas sample valve, Pentahead Locking Device (unless noted otherwise).) [P.V. Bleeder supplied on power class units 750 KVA and above]  
GAUGES & PRESSURE DEVICES:   TANK FITTINGS:   FUSES:    
Thermometer w/2 contacts **   2" DV&S (std above 2500 kva)   Internal weak link  
Liquid level gauge w/contact **   1" fill valve (std above 2500 kva)   Bay-o-net  
Pressure-vacuum gauge w/contacts **   Bolted tank cover   Dual Sensing   High Current  
Bleeder Valve   Hexhead locking device   Fault Sensing   Partial Range ELSP CL back-up  
Sudden Pressure relay   Key Interlock *   ELS BON (current limiting)  
Seal in relay       Provisions ONLY   Under oil current limiting  
  AC   DC   Phase Barriers HV LV   Drywell canisters  
Pressure relief device   Front Barriers   HV LV     Non-loadbreak - INTERLOCKED  
  with contacts     MISC:     Loadbreak  
Winding temp therm w/2 cont.   Seismic Anchoring Pads   NX clip style  
OTHER   Danger signs QTY   Arc strangler fused switch  
    OTHER   Spares QTY    
** in lieu of standard     * location                                       OTHER                                        
SECONDARY METERING & PROTECTION:   SWITCHES   ARRESTERS:  
KWH Meter   type:   On-Off (2 position)     QTY   Dead front M.O.V.E. kV  
Socket only type:   Dual radial (A/Open/B/Open)   Internal under oil   kV  
CT Ratio   Loop feed "V" blade   Live front arresters  
PT Ratio   Loop feed "T" blade   Distribution Class kV  
M/C Breaker; Dim & type   Arc-strangler disconnect   Intermediate Class kV  
    Dual voltage switch   Station Class   kV  
  Supplied by others-Manufacturer installed   Delta-Wye switch  
  Mounting provisions only                     Switch Interlocked w/fuse holders                                            
PAINT: (Standard finish is industrial enamel)   Manufacturer's ID Plate   Customer ID Plate  
  Padmount Green   EXACT DUPLICATE to:   UL Label Required      
  ASA 24   ASA61   SIMILAR to:   SPECIAL ITEMS & SPECIFICATIONS (see also spec sheet #2)  
  ASA49   ASA70     Maintain Dimesions    
  Touch-up     Exceptions:    
  UNDERCOAT        
  EPOXY     Primer only        
  OTHER   DRAWING/PHOTOS attached      
    Special Dimensions    
       
 
 
SPECIAL REQUIREMENTS SPECIFICATION SHEET  
   
Customer   Customer PO#     SE:  
CATALOG #:     KVA:   QTY:   SO#:   PART#:  
                                                                                                         
  STAINLESS STEEL                          
    HARDWARE (nuts, bolts, studs, washers)      
    TANK (plug, weld flanges, lift lugs, rectangular handhole, braces, PRD ring, nipples for fill and drain, studs not included)  
    Padmount (parking stands, jack lugs, rectangular handhole cover, PRD ring, PRD cover)      
    TRANSITIONS      
    BASE      
    COMPARTMENT      
    RADIATORS (SS valve not available)      
    Fill / Drain Valve without sampler      
       
  RADIATORS                                                                                                            
    REMOVABLE RADIATORS    
    Shipped Installed    
    Shipped Separately      
    NOTE: Engineering decides if fluid ships in tank or barrels (indicated on construction note)    
                         
  MISCELLANEOUS ITEMS                                       SPECIAL TRANSITION SIZES                      
    Containment Pan       DRAWING/PHOTOS attached    
    Explosion Proof Wiring Box       Special Dimensions    
    Classification        
    # of Safepaks        
    Voltage 120V        
    240V        
                             
  CUSTOMER SPECIAL REQUIREMENTS                           SPECIAL SHIPPING REQUIREMENTS                            
    Witness Testing       Pallet  
    Final Inspection       Crate  
    ANSI Full Series Impulse Test          
    ANSI Sound Level Test       Shipping Cover    
    ANSI Temperature Test       Impact Indicator    
    OTHER:       Customer Supplied  
          Other  
             
             
                                           
  NOTES:                                                                                                
     
     
     
   
   
   
   
   
   
   
   

Convert Excel spreadsheet to online form