STATION AND SUBSTATION SPECIFICATION SHEET      
 
Email Address:   Customer Name     ZIP Code:  
Company Name:     KVA:   QTY:   SO#:   PART#:  
PHASE:   FLUID:   TEMP:   COOLING:     HERTZ:   CONDUCTOR:     AMBIENT:  
THREE   Type II OIL     65 C   ONAN   60 HZ   ALUMINUM       30 C avg.  
SINGLE   R-TEMP   55 C   ONAN / ONAF-FFA 50 HZ   COPPER       40 C avg.  
    SILICONE   55/65 C   ONAN / ONAF-less fans   Rating's per  
    BIOTEMP   OTHER   ONAN / ONAF   ANSI C57.92  
  ENVIROTEMP(FR3)      
                                                                                                        5 LEGGED CORE  
 
HIGH VOLTAGE   TAPS:   LOW VOLTAGE      
HV:     2-2 1/2% FCAN & BN   LV:    
  BIL: kV   4-2 1/2% FCBN   BIL: kV  
CONNECTION:   2-2 1/2% FCAN & 4-2 1/2% FCBN   CONNECTION:  
DELTA   OTHER   DELTA    
WYE         With single Phase Mid-Tap Coil  
  HO Bushing w/full BIL HO Ground Strap         WYE  
  Neutral internal & isolated   IMPEDENCE:   XO bushing  
  Neutral internally grounded   STANDARD   XO bushing w/ground strap  
GROUNDED WYE (HO-XO Comm.)   OTHER %   GROUNDED WYE (XO-HO Comm.)  
      NOM MIN   MAX      
                                                                                                                         
                           
HV LOCATION: Right Left   Tank face   Top   LV LOCATION: Right Left   Tank face   Top  
              Seg   Seg                   Seg   Seg  
HV BUSHINGS:     HV CONNECTION:   LV BUSHINGS:   LV CONNECTION:  
5/8" eyebolt   6" throat   No holes   4-Hole spade   6" throat   No holes  
2-Hole G-spade   16" throat   No holes   6-Hole spade   16" throat No holes  
Other:   20" Full height ATC (cabinet)   8-Hole spade   20" Full height ATC (cabinet)  
      20" term chamber   10-Hole spade   20" term chamber  
      Top access entry   Other:     Top access entry  
    Bottom access entry             Bottom access entry  
    Full-length transition flange No holes           Full-length transition flange No holes  
      Other:         Other:  
                                                                                                                         
             
ACCESSORIES:  
Standard (L.L. Gauge, Thermometer, P.V. Gauge, 1" fill plug & filter press. conn., 1"DV&S, pressure relief valve, NON-PCB on nameplate,  
  gas sample valve.) [P.V. Bleeder supplied on power class units 750 KVA and above]  
         
Thermometer w/2 contacts**   Sudden pressure relay   Standard fan package  
Liquid Level gauge w/contact**   Seal in relay   with fans  
PVG w/contacts**     AC   DC   Fan voltage  
Bleeder valve   Winding temp therm with 2 contacts     CPT    
Pressure relief device**   Aux. wiring cabinet Type     without fans  
  w/contacts   2" DV&S (std. above 2500 KVA)   ARRESTERS  
Key interlock*     1" fill valve (std. above 2500 KVA)   Distribution Class kV  
  Provisions - type:   Other   Intermediate Class kV  
Danger Signs   QTY         Station Class   kV  
** In lieu of standard   * location     Internal Under Oil kV  
                                                                                                                         
PAINT: (Standard finish is industrial enamel)   Manufacturer's ID Plate   Customer ID Plate  
  Padmount Green   EXACT DUPLICATE to:   UL Label Required      
  ASA 24   ASA61   SIMILAR to:   SPECIAL ITEMS & SPECIFICATIONS (see also spec sheet #2)  
  ASA49   ASA70     Maintain Dimensions    
  Touch-up     Exceptions:    
  UNDERCOAT      
  EPOXY     Primer only      
  OTHER   DRAWING/PHOTOS attached      
    Special Dimensions    
       
 
 
 
SPECIAL REQUIREMENTS SPECIFICATION SHEET  
   
Customer   Customer PO#     SE:  
CATALOG #:     KVA:   QTY:   SO#:   PART#:  
                                                                                                         
  STAINLESS STEEL                        
    HARDWARE (nuts, bolts, studs, washers)      
    TANK (plug, weld flanges, lift lugs, rectangular handhole, braces, PRD ring, nipples for fill and drain, studs not included)  
    Padmount (parking stands, jack lugs, rectangular handhole cover, PRD ring, PRD cover)      
    TRANSITIONS      
    BASE      
    COMPARTMENT      
    RADIATORS (SS valve not available)      
    Fill / Drain Valve without sampler      
       
  RADIATORS                                                                                                            
    REMOVABLE RADIATORS    
    Shipped Installed    
    Shipped Separately      
    NOTE: Engineering decides if fluid ships in tank or barrels (indicated on construction note)    
                         
  MISCELLANEOUS ITEMS                                       SPECIAL TRANSITION SIZES                      
    Containment Pan       DRAWING/PHOTOS attached    
    Explosion Proof Wiring Box       Special Dimensions    
    Classification        
    # of Safepaks        
    Voltage 120V        
    240V        
                             
  CUSTOMER SPECIAL REQUIREMENTS                           SPECIAL SHIPPING REQUIREMENTS                            
    Witness Testing       Pallet  
    Final Inspection           Crate  
    ANSI Full Series Impulse Test            
    ANSI Sound Level Test           Shipping Cover    
    ANSI Temperature Test       Impact Indicator    
    OTHER:       Customer Supplied  
              Other  
                 
                 
                                           
  NOTES:                                                                                                
     
     
     
   
   
   
   
   
   
   
   
 

Convert Excel spreadsheet to online form